The tube guide includes comprehensive information about the tube cutters and the tube cutter can be termed as a tool that allows the users to cut through the plastic tubing very easily. This particular tool is very well utilised by the electricians and plumbers and such tools come in different kinds of styles but all of them have a very sharp blade which can help in slicing through the tubes. There are different numbers of models for the tube cutter and different cutters can cut the tubes ranging from 3MM-110MM.
There is a lot of difference between the tube cutters and the pipe cutters but many of the people are very much confused about them. The pipe cutters are usually made to cut the metal and they always cut into the circular motion so that pipe can be prevented from cracking. On the other hand, the tube cutters are designed with the motive of cutting the softer materials add are used to make the materials more malleable. The small tube cutter which is available cuts the plastic tubing into the circular motions. The blade of the tube cutter is also different to the pipe cutter and the tube curtains blade is made up of the stainless steel while the cutting wheel of the pipe cutters is made up of the hardened and tempered steel.
The working of the cutter will be done with the help of a sharp blade which is used in cutting the plastic tubing whenever the pressure has been exerted by the users. This can be done by squeezing the handles together. Some of the cutters cut the tubes into circular motion by rolling the blade down the plastic tubing and slicing it further through the plastic. It is also very much important that the cuts are made as per the square as possible.
Following are some of the uses of tube:
-The tube cutter can be used in cutting the plastic tubes or piping materials for example- PVC, CPVC, PEX and several other options of plastics.
-These kinds of plastics are most commonly used for water supply lines because they do not cut easily and include the copper piping whenever they come into the contact with the acidic water. The plastic piping is fastly overtaking the copper piping because it is cost-friendly as well as easy to install.
-PVC is most commonly utilised in electrical piping and the small tube cutters, for example, well cutters are also used in the cutting of these kinds of tubes. The blade is normally made up of the stainless steel material because it is very much corrosion resistant and it can always help in retaining the strength as well as toughness quality of the steel. The stainless steel is also made up of 10% of the chromium to make it very much resistant in terms of corrosion. Even if the metal is cut or scratch to the layer will be damaged and more oxide will quickly recover the expose the surface which will further protect it from corrosion. Hence, tube cutters have been thoroughly explained above.